Reference Information
Wireless Setup Using WCN (Windows Connect Now)
Set up a wireless connection by using the
WCN (Windows Connect Now) function of
Windows Vista.
•
Before setting up by using the WCN, establish
wireless communication between the computer
and the access point.
•
Canon assumes no responsibility for any
damage or loss of data stored on your USB flash
drive regardless of the cause even within the
warranty period.
•
If your USB flash drive cannot be attached to the
Direct Print Port of the machine, a commercial
extension cord (for USB flash drives) may be
required.
•
Operation may not be guaranteed depending on
your USB flash drive.
•
USB flash drives with security enabled may not
be used.
•
The machine supports "WCN-UFD".
Reference Information
1
From the Start menu of
Click Add a wireless device
the Windows side, click
on the menu.
Network.
The Add a wireless device to the
network screen will be displayed.
The Network folder opens.
2
3
Click I want to add a wireless device
or computer that is not on the list,
using a USB flash drive.