Identification Of Controls; Front Panel - NAD VISO FIVE Owner's Manual

Dvd surround sound receiver
Hide thumbs Also See for VISO FIVE:
Table of Contents

Advertisement

IDENTIFICATION OF CONTROLS

FRONT PANEL

1
2
3
4
21
20
1 POWER BUTTON: Press this button or the HTR 7 remote's [ON] button
to switch ON the VISO FIVE. The Standby LED indicator will turn from
amber to blue and illuminate the VFD. Pressing the power button again
or HTR 7's [OFF] button turns the unit back to standby mode.
Note that when you do choose to switch OFF to standby using the front
panel Power button, the VISO FIVE's memory back-up system will store
channel level, tuner preset, and other settings for several weeks while
the unit is switched off.
Pressing the [OPEN/CLOSE] button on the front-panel or the HTR 7
remote's [ ] button will switch ON the VISO FIVE from standby mode
and at the same time open the disc tray.
NOTE
It takes around 10 seconds for VISO FIVE to switch to full standby mode
when it is powered OFF from source inputs other than DVD mode. In this
condition, it also takes around 10 seconds for the standby LED to switch
from blue to amber color.
2 STANDBY LED: This indicator will light up amber when the VISO FIVE
is in standby state. When the VISO FIVE is at ON state, this indicator will
illuminate blue.
3 NAVIGATION AND ENTER BUTTONS: The navigation buttons
[PRESET
/
] / [TUNE
/
button allows one to navigate the OSD, title and menu options.
In AM/FM/XM mode, use [PRESET
between radio presets. "Unused" presets are skipped over. Note that
Presets must have been previously stored. Refer also to the item on
"SETTING RADIO PRESET" under "OPERATION - USING THE VISO FIVE
– AM/FM/DB/iPod" discussions.
Pressing momentarily the [TUNE
AM or FM band. Press and hold for more than 2 seconds to search up or
down; the VISO FIVE' s tuner will stop at the next sufficiently strong signal it
encounters. Note that this function, too, "wraps" and will continue searching
up or down from one end of the AM or FM band to the other.
At DVD mode, press [
] to skip forward or [
track, file or chapter. Press [
/
desired scanning speed.
8
5
6
7
] in conjunction with the [ENTER]
/
] to step up or down
/
] button will manually scan the
] to skip backward a
] during disc playback to select the
8
9
10 11 12
19
18
17
When setting up the Timer, use the [
hours and minutes.
4 MENU: Press this button to bring up the DVD disc menu during DVD
disc playback, stop, pause or stop-resume mode. At FM/XM/DAB mode,
the MENU button also functions the same way as that of TUNER MODE
button. See also TUNER MODE description below.
5 DISPLAY: At TUNER mode, toggle this multifunction button to display
at the VFD relevant information of a currently tuned FM, XM or DAB
station.
At CABLE/SAT, VCR or Front source mode, toggle DISPLAY button to
select optical, coaxial audio input or the assigned analog audio input of
the particular source.
When in DVD mode, toggle DISPLAY button to alternatively display the
general disc playback status of the DVD display navigation menu.
6 MEMORY: Use to store tuned stations to the VISO FIVE's preset-memory
locations. Refer also to the item on "SETTING RADIO PRESET" under
"OPERATION - USING THE VISO FIVE – AM/FM/DB/iPod" discussions.
7 REMOTE SENSOR: Point the HTR 7 remote control at the remote
sensor and press the buttons. Do not expose the remote sensor of the
VISO FIVE to a strong light source such as direct sunlight or illumination.
If you do so, you may not be able to operate the VISO FIVE with the
remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.
8 VACUUM FLUORESCENT DISPLAY (VFD): Provides visual
information about the unit's important modes, settings, functions,
status of the current source like disc playback time and other indicators.
9 TIMER ON/OFF: In combination with [PRESET
[MEMORY] buttons, press and hold or toggle to set the internal clock,
ON/OFF timer as well as enable the timer modes. Refer also to the
item on "TIMER SETUP" under "OPERATION – USING THE VISO FIVE
– FEATURES" discussions.
10 FM/AM/DB: Toggle this button to select either AM, FM, DAB (Europe
version) or XM (North America version) tuner functions.
13
16 15
14
/
] buttons to change the
/
] and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents