Taking A Snapshot; Device Settings; Configuring Ip And Firmware Settings; Figure 4-23 Device Settings - Honeywell HD3HDIH User Manual

HD3 equIP

Taking a SnapShot

Device Settings

Configuring IP and Firmware Settings

Document 800-07361V5 Rev A
07/2013
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
The SnapShot function allows you to save an image from Live View to a default folder on
your computer (C:\Program Files\Honeywell Video Systems\Support\Snapshots). Files are
saved as: DeviceName_Date_Time.bmp. You are not asked for confirmation.
SnapShot is available to Administrators and Users with administrator and guest privileges.
The Device Settings tab allows you to
• View the network settings and firmware details of the camera
• Configure local video out
• Restore to or to reboot a device.
Depending on the hardware installation, there is a tab called either Device Information or
Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information
available in the Honeywell IP Utility. It provides read-only network settings, firmware
settings, and video formats without having to access the IP Utility.
The Device Settings are the same for the Primary and Secondary streams.
Figure 4-23 Device Settings
65