Timeline Configuration; Using The Playback Assistant; Zooming In And Out; Taking A Snapshot - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide
recording type to display in the Playback interface. The filter is at the bottom of the Playback
interface.

Figure 4-6 Record Type Filter in Playback

Timeline Configuration

You can configure the playback timeline in Playback to show the last 24 hours, 2 hours, 1
hour, or 30 minutes of recorded video. Click to select the target time scale.

Figure 4-7 Playback Timeline Configuration

Using the Playback Assistant

The Playback Assistant buttons allow you to zoom in and out on video, and to take snapshots.
Note This function is not supported by model HBW2PER1V.

Zooming In and Out

To zoom in, in the Playback Assistant area (see
and then use the scroll wheel on your mouse to zoom in on an area of the video.
Right-click the mouse to return the video to its original size.

Taking a Snapshot

Click while playing video to manually take a snapshot. The snapshot is saved to the file
path on your local PC. To configure the file path, see

Creating a Video Clip

You can clip and save a section of recorded video during video playback using the clip
function. Playback of recorded video is automatically paused during clipping.
20
4-1), click the Zoom In button
Figure
Path on page 68.
,