Adjusting The Lens Focus; Figure 2-9 Gimbal Movement - Honeywell HD3HDIH User Manual

Installation and Setup

Adjusting the Lens Focus

TECH TIP!
28
Figure 2-9 Gimbal Movement
5. Re-tighten the locking screw to lock the gimbal assembly in place.
Note Figure 2-8 and
camera.
Caution Adjust the camera field of view only by moving the gimbal. Do not
move the camera lens to adjust the camera field of view as this might
result in irreparable damage.
Lenses are pre-focused at the factory. They might require a final adjustment after
installation because the optical effect of the dome bubble might cause a slight defocusing
of the lens.
To check the focus, hold the dome bubble over the lens while making any adjustments.
Legend
A = Tilt rotation
B = Horizontal rotation
C = Pan rotation
Figure 2-9 illustrates the ways in which you can adjust your