Statistics: Received Bit Rate And Frame Rate; Camera Setup; Figure 4-30 Frame Rate Settings - Honeywell HD3HDIH User Manual

IP Camera Web Client

Statistics: Received Bit Rate and Frame Rate

Camera Setup

72
Selecting Frame Rate for Priority
When Frame Rate is selected as the priority, you can adjust the Target Bit Rate.
Figure 4-30 Frame Rate Settings
Frame Rate is selected.
Target Bit Rate
3. Click Apply. Adjustments in your compression settings are captured in the statistics.
As you make adjustments, the Statistics field acts as a visual reminder of how your
settings affect the bit rate, frame rate, and bandwidth usage. See
Bit Rate and Frame Rate.
4. When you are satisfied with your settings — that is, that the image quality and
bandwidth usage meets your requirements — click Apply to save your settings.
Settings are not saved unless you click Apply.
To view in real time the received bit rate and frame rate statistics of the current image:
1. Click the Compression Settings tab.
2. In the Statistics area, select the Received check box.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
The Camera Setup tab provides access to the settings used to configure the camera
configurations for both Primary and Secondary streams. The following section explains
Auto Exposure and White Balance setup.
Increasing or decreasing the target bit rate threshold will
increase or decrease the picture quality accordingly. This
priority allows the actual bit rate to fluctuate beyond the Target
Bit Rate.
Statistics: Received