Transportation With Overhead Crane; Product Placement - Buderus Logalux PL750 Installation And Maintenance Instruction

Solar combi-tank for dhw and space heating
Table of Contents

Advertisement

3
Transportation
3.1.2

Transportation with overhead crane

V Place the two lifting hooks of the chain into the desig-
nated lifting rings on top of the tank.
V Hook the crane chain into the lifting chain.
V Protect the tank from falling and lift the tank to its final
installation location.
V Lower the tank carefully to the floor; do not drop down
onto the floor!
One can move the tank inside the building also in a hori-
zontal manner due to possible height restrictions.
V Remove only the tank packaging at the final installation
site.
3.2

Product Placement

Caution: Damage due to internal stresses!
V Place the tank in a frost free room.
V Use the solar combi-tank ONLY in closed
loop applications.
V Open expansion tanks can NOT be used
with these solar combi-tanks.
Sufficient overhead space is required for the
removal of the magnesium anode rod as well
as some side clearance.
V Verify for suitable clearance dimensions by
referencing Tab. 1, page 7 and Fig. 6.
V Maintain suggested service access dimensions
(Æ Fig. 6).
V Place tank on a level and sufficiently strong floor.
10
Fig. 5
Transportation with lifting crane
1
Lifting eyes
Clearance to wall
16"/400
Fig. 6
Recommended minimum clearances
(in inch/mm)
1
Solar Combi-tank
2
Boiler
Logalux PL750/2 S - Changes may be made following technical improvements!
1
2
>4"/>100
6 720 615 217-08.1RS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Logalux pl750 2 s

Table of Contents