Replacing the Display Assembly
Procedure
Place the display assembly in position and replace the screws that secure the
1
display assembly to the computer base.
Route the display cable through the routing guides and connect the display cable
2
to the system-board connector.
Route the antenna cables through the routing guides and slide the cables through
3
the slot on the computer base.
Close the display and turn the computer over.
4
Route the antenna cables through the routing guides at the bottom of
5
the computer.
Connect the antenna cables to the connectors on the Mini-Card.
6
See "Replacing the Wireless Mini-Card" on page 33.
Postrequisites
Replace the palm rest. See "Replacing the Palm Rest" on page 41.
1
Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
2
page 29.
Replace the base cover. See "Replacing the Base Cover" on page 20.
3
Replace the keyboard. See "Replacing the Keyboard" on page 18.
4
Replace the battery. See "Replacing the Battery" on page 13.
5
Follow the instructions in "After Working Inside Your Computer" on page 9.
6
Display
|
63