Procedure
Disconnect the antenna cables from the connectors on the Mini-Card.
1
Remove the screw that secures the Mini-Card to the
2
system-board connector.
4
3
2
1
1
antenna cables (2)
3
screw
Lift the Mini-Card out of the system-board connector.
3
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information,
see "Protecting Against Electrostatic Discharge" in the safety information that
shipped with your computer.
32
|
Wireless Mini-Card
2
Mini-Card
4
system-board connector