Replacing The Msata Card - Dell Inspiron 17R-5720 Owner's Manual

Replacing the mSATA Card

Procedure
Remove the new mSATA card from its packaging.
1
Align the notch on the mSATA card with the tab on the
2
system-board connector.
CAUTION: Use firm and even pressure to slide the mSATA card into place.
If you use excessive force, you may damage the connector.
CAUTION: To avoid damage to the mSATA card, never place cables under the
mSATA card.
Insert the mSATA card connector at a 45-degree angle into the system-board
3
connector.
Press the other end of the mSATA card down into the slot on the
4
system board and replace the screw that secures the mSATA card to the
system-board connector.
Postrequisites
Replace the base cover. See "Replacing the Base Cover" on page 20.
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Follow the instructions in "After Working Inside Your Computer" on page 9.
3
mSATA Card (Optional) | 37