Selecting The Automatic Operating Mode - Samsung APV48Q0AN User Manual

Selecting the Automatic Operating Mode

You can start the air conditioner in the Automatic mode.
In the Automatic mode, the temperature and the optimum fan speed is
selected automatically.
1 If necessary, press the
◆ The power indicator on the control panel comes on.
Result:
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
2 If the is not displayed on the control panel, press the
remote control one or more times until it appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in the Auto mode.
◆ You can change modes at any time.
N o t e
N o t e
◆ If the indoor temperature is higher than 74
conditioner operates in the Cool mode. If the indoor
temperature is lower than 68
operates in the Heat mode.
3
To control the direction of the air flow, refer to page 20.
(On/Off) button.
O
F(24°C), the air
O
F(20°C), the air conditioner
button on the
button.
◆ Cooling operation
◆ Heating operation
15
E-