Removing Excess Humidity - Samsung APV48Q0AN User Manual

Removing Excess Humidity

18
E-
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1 If necessary, press the
◆ The power indicator on the control panel comes on.
Result:
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
2
If the is not displayed on the control panel, press the
remote control one or more times until it appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in the Dry mode.
N N o o t t e e
You can change modes at any time.
3 To adjust the temperature, press the
required temperature is displayed. Possible temperatures are between
O O
65 F(18°C) and 86 F(30°C) inclusive.
◆ Each time you press the
Result:
- The temperature is adjusted by 1
- The indoor unit beeps.
◆ The air conditioner starts removing the excess humidity;
◆
the quantity of air is adjusted automatically.
4
The fan speed is selected automatically(
5
To control the direction of the air flow, refer to page 20.
(On/Off) button.
buttons one or more times until the
buttons:
O
F(1°C).
: Automatic).
button on the
button.