Selecting The Automatic Operating Mode - Samsung APH450PG Owner's Instructions Manual

Selecting the Automatic Operating Mode

10
E-
You can start the air conditioner in AUTO mode by pressing
the MODE button on the control panel.
1 If necessary, press the ON/OFF(
Result: The power indicator on the control panel comes on.
The indoor unit beeps twice.
The operation mode previously set is displayed.
The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANTE The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Switched on
Stopped
lt will start up normally after a three-minute rest period.
2
If the AUTO indicator is not displayed, press the MODE button one or
more times until it appears.
Result: The indoor unit beeps each time you press MODE.
The air conditioner starts up in AUTO mode.
The standard temperature is set automatically.
In AUTO mode, the optimum fan speed is selected automatically
Note
and cannot be changed.
You can change modes at any time.
3
To control the air flow direction when necessary, refer to page 15.
) button.