Selecting The Automatic Operating Mode - Samsung FH052EZA Owner's Instructions Manual

Selecting the Automatic Operating Mode

In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
1 If necessary, press the
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: The indoor unit beeps each time you press the
The air conditioner runs in AUTO mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3
To adjust the temperature, press the
required temperature is displayed. Possible temperatures are between 18°C
and 30°C inclusive.
Result: Each time you press
- The temperature is adjusted by 1°C.
The air conditioner takes the present temperature of the room
every 30 minutes.
- If the temperature is higher than the selected temperature +α,
the air conditioner will start cooling.
- If the temperature is lower than the selected temperature -α,
the air conditioner will start heating.
The α is a preset temperature for the most comfortable environment.
N N N N o o o o t t t t e e e e
It can be adjusted by your installation specialist when installing the
product.
(On/Off) button.
buttons one or more times until the
buttons:
button.
9
E-