La Crosse Technology WT-8112U Instruction Manual page 8

1. The time zone (LCD2) will start flashing (Default setting "EST
-5―). Select the desired time zone by pressing and releasing
the + key.
Time zone settings: -12, -11, -10, ALA, PST, MST, CST, EST,
ATL, -3, -2, -1, 0, +1, +2...+12. (Default: EST)
Press and release the SET key to enter the "DST Setting".
2.
DST (daylight saving time)
1. The ON digit will start flashing on LCD1. Set the DST ON or
OFF by pressing the + key.
Press and release the SET key to enter the "Language
2.
Setting".
NOTE: The DST default is ―ON‖, meaning that the WWVB will
automatically change the time according to Daylight Saving Time in
the spring and fall. For areas that do not recognize DST changes
(Arizona and parts of Indiana) turn the DST ―OFF‖.
LANGUAGE
The weekdays can be displayed in LCD1 with the pre-set languages:
English (US), Spanish (E), French (F), and German (d):
1. Set the desired language for the weekday display in LCD1 by
use of the + key.
Press and release the SET key to enter the mode "Manual
2.
Time Setting".
SET THE TIME MANUALLY
In case the radio-controlled clock is not able to detect the WWVB-
signal (disturbances, transmitting distance, etc.); the time can be
manually set. The clock will then work as a normal Quartz clock.
NOTE: the time will be displayed with an additional "PM" for the time
from 12:00 noon until 11:59.
NOTE: The unit will still try to receive the signal every day despite it
being manually set. When it does receive the signal, it will change
the manually set time into the received time. During reception
attempts the WWVB tower icon will flash. If reception has been
8