La Crosse Technology WT-8112U Instruction Manual page 11

LCD will automatically turn ON automatically if the
environment is bright enough; the surrounding
environment brightness is checked every 5 seconds
No information will be displayed when the LCD is OFF, but
all the settings and operations will remain, except for the
temperature and humidity measurements.
If the solar mode setting is OFF:
LCD will remain ON constantly.
EXIT THE MANUAL SETTING MODES
To return to the normal display mode from anywhere in
manual setting mode simply press the SNZ key anytime.
If no keys are pressed for at least 15 seconds in setting mode,
the radio-controlled solar clock will automatically switch back
to normal display mode.
ALARM
To enter into the alarm setting mode:
1. Hold the ALM key for 4 seconds. The hour digits start
flashing.
2. Press and release the + key to set the hour.
3. Press and release the ALM key to set the minutes. The
minute digits start flashing.
4. Press and release the + key to set the minutes.
5. Press and release again the ALM key to exit the Alarm setting
mode or wait for 15 seconds automatic timeout.
TO DEACTIVATE THE ALARM:
Alarm icon ((( ))) (ON)
11