LCD SCREEN DESCRIPTIONS
The radio-controlled clock's LCD is divided into 2 sections and once
the batteries are inserted, all the segments will light up briefly before
displaying the information for time, date, indoor temperature and
indoor humidity.
WWVB
time
Indoor
temperature
MANUAL SETTINGS
NOTE: If the radio-controlled clock has already successfully
received the WWVB time signal and displays the correct time
and date, then the Manual settings can be skipped.
After completion of the above described procedures in ―Set-up" the
manual setting modes can be entered by pressing the SET key. The
following settings can now be programmed:
Time zone setting
DST ON/OFF
Language display setting
Manual time setting
Year setting
Month setting
Date setting
Weekday setting
12/24h time format display
ºF/ºC temperature setting
Solar mode setting
TIME ZONE
The time zone can be set between the +/–12-hour range in LCD2. To
do this:
Radio reception icon
Date
Weekday
7
Alarm icon
Low battery
icon (clock)
Indoor
humidity
display