Download Print this page

La Crosse Technology WT-8112U Instruction Manual page 13

Radio-controlled solar clock
Hide thumbs Also See for WT-8112U:

Advertisement

TROUBLESHOOTING:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
The LCD is OFF.
1) Move the solar clock to a brighter
environment.
2) Check that the solar panel is not
covered.
3) Replace the battery if using alkaline
battery.
4) Enter program menu and turn Solar
Mode OFF (this is a power saving
feature).
No reception of WWVB signal
1) It may help reception to face the front of
the radio-controlled clock in the general
direction of Ft. Collins, Colorado.
2) Wait overnight for signal.
3) Be sure the radio-controlled clock is at
least 6 feet (2 meters) from any electrical
devices, i.e. TV sets, computers, or other
radio controlled clocks.
4) Remove batteries for five minutes,
reinsert and leave the unit alone overnight
without pressing any keys.
Hour is incorrect (minute and date are
correct).
1) Be sure the correct time zone and daylight
saving time is selected.
"OFL― appears in the indoor temperature
section of the LCD
1) Move the radio-controlled clock to an
area with warmer or cooler surrounding
temperature. Current surrounding
temperatures are outside measuring
range. Batteries.
"00" appears in the in humidity section of
the LCD.
1) Remove the battery from the unit for ten
minutes, Press any button 20 times with
battery out then reinsert it again.
The clock appears to be locked up or
displays partial segments.
13

Hide quick links:

Advertisement

loading