Programming - Radio Shack Bedside SAME Weatheradio Owner's Manual

listed in the telephone book under "US
Government, Department of
!
Commerce."
1. Unplug the AC adapter and
remove the backup battery.
2. Hold down
WEATHER
supplied adapter to connect to AC
USR SET
power. appears and the
®
Weatheradio beeps. Release
.
WEATHER
3. Press e to select a beep tone, or
d to select a siren tone. The
®
Weatheradio sounds the selected
tone.
4. Press g to silence the tone.
5. Press to clear the memory
MENU
and restore the factory settings.
DEFAULT USR SET
, and then
6. Unplug the AC adapter and
reconnect it. Re-install the backup
battery.

PROGRAMMING

®
Your Weatheradio is pre-programmed
with the seven NOAA broadcast
frequencies (channels 1-7). It is also
preset to receive any weather alert
broadcasts within its reception range.
!
IMPORTANT
Clear reception of a
weather broadcast
signal does not
guarantee that an
emergency alert will
trigger your
and use the
Weatheradio ® 's alert
function. Be sure you
choose the proper
location for the
Weatheradio ® .
appears.
!
11