Programming - Radio Shack 12-261 Owner's Manual

Government, Department of
!
Commerce."
1. Unplug the AC adapter and
remove the backup battery.
2. Hold down
supplied adapter to connect to AC
power.
USR SET
Weatheradio beeps. Release
WEATHER
3. Press e to select a beep tone, or
d to select a siren tone. The
Weatheradio sounds the selected
tone.
4. Press g to silence the tone.
5. Press
MENU
and restore the factory settings.
, and then
DEFAUL T
6. Unplug the AC adapter and
reconnect it. Re-install the backup
battery.

PROGRAMMING

Your Weatheradio is pre-programmed
with the seven NOAA broadcast
frequencies (channels 1-7). It is also
preset to receive any weather alert
broadcasts within its reception range.
and use the
WEATHER
appears and the
.
to clear the memory
USR SET
Clear reception of a
weather broadcast
signal does not
guarantee that an
emergency alert will
trigger your
Weatheradio
function. Be sure you
choose the proper
location for the
Weatheradio
appears.
!
IMPORTANT
© 's alert
©
.
!
11