Alert Type Setup - Radio Shack Bedside SAME Weatheradio Owner's Manual

AVLABLE
channel), and
Then a beep sounds and
reappears.
If no channel is detected,
AVLABLE BACK TO
, , and
(the preset channel) appear. Then
a beep sounds and
reappears.
Manual
MANUAL
3. If you selected
CHANNEL #
(current channel)
appears and the broadcast begins.
Repeatedly press e or d until the
desired channel number appears.
Press g to confirm your selection.
A beep sounds and
channel) appears. Then a beep
SEL CH
sounds and reappears.Ô
4. Press to exit.
MENU
A T S
LERT YPE ETUP
®
The Weatheradio responds to an
NWS alert broadcast in one of two
ways.
Voice – An alert tone sounds for 10
seconds, and then the weather (voice)
broadcast automatically turns on for
five minutes. The alert description and
duration appear.
appear.
AUTO
NO CH
CHANNEL #
AUTO
, press g .
Ô
CHANNEL#
(new
If you received a NOAA
broadcast on more than
one channel, the one
with the best reception
might not be the one
broadcasting
information for your
location. Contact your
local RadioShack store
or the NWS to find out
which frequency NOAA
is using to broadcast
information for your
location.
Ô
NOTE
13