Programming The Weatheradio - Radio Shack 12-250 Owner's Manual

7 channel wrsame weatheradio with alert

Table of Contents

When the Weatheradio's alert function is turned on

and it receives an NWS alert broadcast, the Weath-

eradio sends a 7.5VDC signal to the connected mod-

ule interface, and an alert sounds on both the

Weatheradio and the connected system.

To remove the wires you connected to your Weath-

eradio's

terminals, gently pull out the

ALARM OUT

wires while using a pointed object such as a straight-

ened paper clip to press the orange tabs under the

wires.

PROGRAMMING THE

WEATHERADIO

Note: Some of the Weatheradio's keys (such as

–

)

are located under the cover on top of the Weathera-

dio. Slide off the cover to access the keys.

The first time you use your Weatheradio, it is auto-

matically set to use the NOAA weather broadcast fre-

quency 162.400 MHz (Channel 1) and receive all

SAME alert signals broadcast within a 50-mile radius

of where you installed it.

Table of Contents

Show Quick Links

Table of Contents