Ô
Ô
NOTE
•
When editing FIP
g
code,press
with "-"
blinking can clear the
entry. ------ is shown to
indicate an empty entry.
16
• SINGLE – Receives a SAME alert
signal for the FIPS code
programmed in memory location 1.
LOCATION
1. When
and
appear, press g . The current
response location appears and
flashes.
LOCATION
2. Repeatedly press e or d until the
ALL LOC
desired setting (
MULTIPLE
) appears.
All Locations
To store all locations, press g when
LOC
appears. A beep sounds and the
LOCATION
setting is stored.
and
stops flashing.
LOCATION
Single
1. To store a single location, press g
SINGLE
when
appears.
appears.
2. Press g . The first digit of the code
flashes.
3. Press e or d to select the first
digit. When the correct number
appears, press g to move to the
next digit. If you made a mistake,
press f to move back, and then
press e or d to correct the
number. Ô
LOCATION
SINGLE
,
, or
ALL
reappears
1-------