How To Use The Elliptical Exerciser - ProForm 590 E User Manual

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical exerciser has been
exposed to cold temperatures, allow it to warm to
room temperature before plugging in the power
adapter. If you do not do this, you may damage
the console displays or other electronic compo-
nents.
Plug the power
adapter into the jack
on the front of the ellip-
tical exerciser. Then,
plug the power adapter
into an appropriate
outlet that is properly
installed in accordance
with all local codes
and ordinances.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Due to the size and weight of the elliptical
exerciser, moving it requires two persons. Stand in
front of the elliptical exerciser, hold the upright, and
place one foot against one of the front wheels. Pull on
the upright and have a second person lift the handle
on the ramp until the elliptical exerciser will roll on the
front wheels. Carefully move the elliptical exerciser to
the desired location, and then lower it to the floor.
Power
Adapter
12
Pull on
the upright
Place
your foot
here
Lift here