Rear Panel; To Make A Recording - NAD C 375BEE Owner's Manual

IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 3758EE is powered off or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components whife making or breaking any signal or AC power connections.
MP
input:
Input for a Media Player or other line-level signal source.
Use a twin RCA-to-RCA lead to connect the Media Player's left and right
"Audio Outputs"
to
this input.
NOTE
Ifan external Media Player is connected to the front MP socket (using a
3.5mm stereo plug) whife listening to a MP line-level source, the external
Media Player will be directly selected with the MP line-level source
immediately disconnected.
2 CD INPUT: Input for a CD or other line-level signal source. Use a
twin RCA-to-RCA lead to connect the CD player's left and right "Audio
Outputs"to this input.
3 TUNER INPUT: Input for a tuner or other line-level signal source. Use
a twin RCA-to-RCA lead to connect the tuner left and right "Audio
Outputs" to this input.
4 DISC INPUT: Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplifier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left
and right "Audio Outputs"to this input.
NOTE
With the optional PP 375 PHONO MODULE installed, the DISC input
socket is disabled and the PHONO source selected
as
the active input.
5 AUX INPUT: Input for additional line level input signals such as
another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary
unit's left and right "Audio Outputs" to this input.
8
6 TAPE 2 IN/OUT: Connections for analog recording and playback
to
an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
to the left and right "Audio Output" of the tape machine to the TAPE 2 IN
sockets for playback. Connect the left and right "Audio Input" of the tape
machine to the TAPE 2 OUT sockets for recording.
7 TAPE MONITOR IN/OUT: Connections for analog recording and
playback to a secondary audio tape recorder of any type. Using twin
RCA-to-RCA leads, connect
to
the left and right"Audio Output"of
the tape machine to the TAPE MONITOR IN sockets for playback and
tape monitoring. Connect the left and right "Audio Input" of the tape
machine to the TAPE MONITOR OUT sockets for recording.
TO MAKE A RECORDING
When any source is selected, its signal is also fed directly to any tape
machine connected to the TAPE 2 OUT or TAPE MONITOR OUT for
recording.
TAPE TO TAPE COPYING
You can copy between two tape machines connected to your NAD
C 375BEE. Put the source tape in the recorder connected to Tape 2
and the blank tape into the recorder connected to Tape Monitor. By
selecting TAPE 2 input you can now record from Tape 2 to Tape Monitor
and monitor the signal coming from the original tape.
NOTE
There will be no Tape 2 output when Tape 2 (or Tape Monitor OUT when
Tape Monitor) is the selected source input. This prevents feedback
through the recording component thereby preventing possible damage
to your speakers.