Download Print this page

Placing Calls; Placing An Outside Call - NEC Portrait 308 Quick Reference Manual

Multibutton telephone
Hide thumbs Also See for Portrait 308:

Advertisement

Placing Calls

Placing an Outside Call . . .

Press a line key for
1. Lift handset.
quick access:
2. Press
OR
Dial codes for outside
1. (Optional) Lift handset.
lines:
2. Press
number (e.g. 01).
Calling a Co-Worker . . .
Dial using the
1. (Optional) Lift handset.
Intercom:
2. Press
3. Dial your co-worker's extension number.
4. (Optional) Dial
ring your co-worker.
This step may not be required if Single
Step Access is enabled.
and dial outside number.
You may also have line group (loop)
keys on your phone.
If your system is behind a PBX, you
may have to dial 9 before your number.
This step may not be required if Single
Step Access is enabled.
WXY
ICM
9
+
+ the outside line
This step may not be required if Single
Step Access is enabled.
For one-touch calling, press a DSS key
instead of going on to step 2.
ICM
.
If you hear ringing, wait for an answer.
If you hear a beep, begin speaking.
You may also be able to dial a co-
worker's Hunt Group.
To Page, dial 80 for All Call, 81-84 for
internal zones, or 85-87 for external
zones (308 System uses only 85 for
external zone paging).
For your Voice Mailbox, press
SPK+VM Key (see One-Touch Keys).
Q Z
to force the call to
If your call doesn't go through . . .
Camp On and Callback
When you hear system
1. For Intercom calls, dial
(wait without hanging up).
busy, use Camp On or
Callback:
1. For Intercom calls, dial
to leave a Callback for an extension.
For Outside calls, press
Queue Group number (e.g., 1-6) if all
lines busy. Hang up.
2. Lift handset or press
tem calls you back.
3. (Outside calls only) Place your call again.
To cancel your Callback (ICM calls only):
1. Lift handset and hang up.
Message Waiting
1. After placing an ICM call, do not hang up
Leave a Message
Waiting so your co-
if you get no answer or a busy signal.
worker can call you
2. Press
back:
3. Hang up.
3. To leave a Selectable Display Message,
press *, the message number (e.g., 00-49)
and *.
4. Hang up.
to Camp On
When the called party hangs up, the
call rings you back.
OR
and hang up
and dial a
when the sys-
:/-
0
.
MW on your co-worker's phone flashes
fast. Your MW LED has a double wink.
With voice mail, press 3 instead to leave
a message in the co-worker's mailbox.
OR

Advertisement

loading

This manual is also suitable for:

Portrait 824