Central Office Calls, Placing - NEC Aspire Manual

Section 3: Features
Central OfÞce Calls, Placing
• Available - 8 trunks.
• Additional trunk ring tones added with 1.02+.
• Trunk Port Disable feature available.
• DeÞning CODEC Filter settings available.
• Sidetone Volume Setup available.
Description
86
Aspire S
The system provides ßexibility in the way each extension user can place outgoing trunk calls. This
lets you customize the call placing options to meet site requirements and each individual's needs. A
user can place a call by:
● Pressing Line Keys or "Loop Keys"
● Pressing a Trunk Group (i.e., loop) key
● Pressing a Trunk Group Routing (dial 9) key
● Dialing a code for a speciÞc trunk (#9 + the trunk number)
●
Dialing a code for a Trunk Group (804 + group number)
● Dialing a code for Trunk Group Routing or ARS (9)
● Dialing an Alternate Trunk Route Access Code (which you must deÞne)
Trunk Port Disable
The system provides a service code (Default: 145) which can be used by an extension user to block
a trunk for outgoing calls. The user which busied out the trunk will still have access to it. All other
users will be blocked from seizing it to place an outgoing call. The trunk, however, can still be
answered by any users programmed with the trunk access.
Additional Trunk Ring Tones
Additional options have been added for the ring tone patters for an incoming call. Previously, in
Program 22-03 the system provided ring tone patterns 1-4. With software 1.02 and higher, Melody
1 - Melody 5 are now available as well.
CODEC Filter Data Setup Program Added
When Program 81-07-01 : CODEC Filter Setup for Analog Trunk Ports is set to "4 - SpeciÞed
Data", the system will use the settings in Program 81-09 : COIU CODEC Filter Data Setup.
These values should not be changed from their default settings unless directed by NEC'S Technical
Service department.
The side tone of the COIU is adjusted using all 16 values, however, special software is required
in order to compute these values. The setting is not proportional to the gain level. To change
these values, contact NEC's Technical Service department for assistance.
Sidetone Volume Setup
A new option has been added to allow the system programming for the keyset side tone volume.
There are two levels, based on whether the connected trunk is a digital trunk or analog trunk.
Aspire M/L/XL
• Available - 200 trunks.
• Additional trunk ring tones added with 1.02+.
• Trunk Port Disable feature available with software 1.00+.
• DeÞning CODEC Filter settings available with software
1.04+.
• Sidetone Volume Setup added in 1.04+ software.
Product Description