Horizon Fitness HORIZON CLUB T700 User Manual page 6

AS SE MB LY ST EP 
HARDWARE BAG  CONTENTS :
BOLT (G)
20 mm
Qty: 4
A Open HARDWARE BAG .
B With running deck in lowered position, place CONSOLE on upright masts. Align the
brackets that are underneath the console with the top holes of the upright masts.
C To assemble the LEFT CONSOLE MAST to the CONSOLE, insert 1 BOLT (G), 1 SPRING
WASHER (H) and 1 FLAT WASHER (B) into the 2 holes in the LEFT CONSOLE MAST and
lightly tighten.
D Gently lift RIGHT side of the CONSOLE to connect the CONSOLE CABLE. Carefully tuck wires
in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.
E Repeat STEP C above to attach the RIGHT CONSOLE MAST to the CONSOLE.
F Tighten console bolts completely.
10
T700-T800_Treadmill_Rev.1.4.indd10-11 10-11
SPRING WASHER (H) FLAT WASHER (B)
15 mm 20 mm
Qty: 4 Qty: 4
CONSOLE
CONSOLE CABLES
* NOTE: Be
careful not to
pinch any
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D wires while
attaching the
console.
RIGHT CONSOLE MAST
FLAT WASHERS (B)
SPRING WASHERS (H)
BOLTS (G)
ASSEMBLY STEP 
HARDWARE BAG  CONTENTS :
BOLT (I)
15 mm
Qty: 4
CONSOLE MAST
A Open HARDWARE BAG .
B Align SUPPORT BAR with holes in CONSOLE MASTS.
C Insert BOLTS (I) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D Tighten support bar bolts completely.
BOLTS (I)
SUPPORT BAR
11
4/23/07 10:09:22 AM