Subframe Upright Position - Honda CRF250X 2007 Owner's Manual & Competition Handbook

Refer to Safety Precautions on page 25.
The subframe may be adjusted to an upright
position to permit servicing of the rear
suspension.
Upright Position
1. Remove the right side cover bolt (1), collar
(3), seat mounting bolt (2) and right side
cover (4).
(4)
(2)
(1)
(1) right side cover bolt (3) collar
(2) seat mounting bolt (4) right side cover
2. Open the air cleaner housing cover (5) by
turning the quick fastener (6)
counterclockwise and remove the left side
cover bolt (7), collar (9), seat mounting bolt
(8) and left side cover (10).
3. Remove the seat (11) (page 36).
(5)
(6)
(5) air cleaner housing cover
(6) quick fastener
(7) left side cover bolt
(8) seat mounting bolt
4. Remove the muffler (page 62).
5. Remove the wire band (12), rear suspension
upper mounting nut (13) and bolt (14).
(12)
(12) wire band
(13) rear suspension upper mounting nut
(14) rear suspension upper mounting bolt
(3)
6. Loosen the screw (15) on the air cleaner
connecting tube clamp (16).
(11)
(8)
(15) screw
(16) air cleaner connecting tube clamp
(10)
(9)
(7)
(9) collar
(10) left side cover
(11) seat
(13)
(14)
(16)
(15)

Subframe Upright Position

7. Loosen the subframe mounting upper bolt
(17) and remove the subframe mounting lower
bolts (18).
(17)
(18)
(17) subframe mounting upper bolt
(18) subframe mounting lower bolts
8. Lift the subframe (19) as shown.
Tighten the subframe mounting upper bolt to
the specified torque:
22 lbf·ft (30 N·m, 3.1 kgf·m)
(19)
90°
(19) subframe
Servicing Your Honda
39