Honda CRF250X 2007 Owner's Manual & Competition Handbook page 124

28.Install the front visor by aligning its grommets
(36) with the tabs (37) on the steering stem.
(37)
(36) front visor grommets
29.Install and tighten the front visor bolts (38).
Install the handlebar pad (39).
(38) front visor bolts (39) handlebar pad
30.With the front brake applied, pump the fork
up and down several times to seat the axle and
check front brake operation.
(36)
(37) tabs
31.While keeping the forks parallel, alternately
tighten the right axle pinch bolts (40) to the
specified torque:
15 Ibf·ft (20 N·m, 2.0 kgf·m)
NOTICE
(39)
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the
(38)
left fork leg clamp inner surface.
32.Install the tripmeter cable (41) and tighten the
lock nut securely.
(40) right axle pinch bolts
(41)
(40)
(41) tripmeter cable
Front Suspension Adjustments
33.Install the disc cover (42) and tighten the bolts
(43) to the specified torque:
10 Ibf·ft (13 N·m, 1.3 kgf·m)
(42) disc cover (43) bolts
34.Turn the rebound damping (44) and
compression damping (45) adjuster back to
their original setting.
(44)
(44) rebound damping (45) compression
adjuster
Adjustments for Competition
(42)
(43)
(45)
damping adjuster
119