If The "-" Indicator Is Blinking In The Gear Position Window While Riding - Honda AFRICA TWIN 2024 Owner's Manual

If the "–" Indicator is Blinking in the Gear Position Window While Riding
CRF1100D/D3/D4/DL4
If the "–" indicator is blinking while riding, you
may have a serious problem with the Dual
Clutch Transmission system.
Park your vehicle in a safe place and have
your vehicle inspected by a dealer
immediately.
It may be possible to ride your vehicle by
following the steps below.
Turn the ignition switch to the
1.
position.
Turn the ignition switch to the (On)
2.
position and start the engine.
If you cannot start the engine:
Turn the ignition switch to the
position and move the vehicle back and forth
slightly (to disengage the gears).
Turn the ignition switch to the (On) position
again and start the engine.
If you still cannot start the engine:
Start the engine while applying the brake
lever or pressing the brake pedal.
If you can shift from N to D mode:
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your vehicle to your dealer riding at a
safe speed.
(Off)
If you can't shift from N to D mode and the "–"
indicator is blinking:
Damage is preventing you from riding. Have
your vehicle inspected by your dealer
immediately.
(Off)
315