Optional Parts List - Honda CRF250X 2007 Owner's Manual & Competition Handbook

These parts and tools may be ordered from your
authorized Honda dealer.
ENGINE Remarks
Cooling system
Fan
assembly
Bolt
An optional cooling fan is availabe
for competition use.
The fan will help avoid the engine
damage if the engine is kept idling
too long when hot, or when riding
in mud or sand or any condition
that causes high engine load at
low vehicle speed.
FRAME
Driven sprocket
Standard
Nut
Optional
Drive chain
size/link
Handlebar
Thermo switch
lower holder
Standard
Optional
TOOLS
Pin spanner A
Workstand
Air gauge
Remarks
< >: Drive chain links
53 Teeth, Aluminum.
<116>
54 Teeth, Aluminum
<116>
52 Teeth, Aluminum
<116>
DID 520MXV/120ZB
3 mm offset
no offset
Remarks
To adjust spring pre-load.
(two spanners required)
For maintenance
For checking tire air pressure.

Optional Parts List

FRAME Remarks
Shock spring
268.8 lbf/in (4.80 kgf/mm)
Standard
or
Optional 254.8 lbf/in (4.55 kgf/mm)
Softer
Stiffer 280 lbf/in (5.00 kgf/mm)
291.2 lbf/in (5.20 kgf/mm)
Fork spring 23.52 lbf/in (0.42 kgf/mm)
Standard
2 scribe marks
(aftermarket parts)
Optional 22.4 lbf/in (0.40 kgf/mm)
Softer 3 scribe marks
Stiffer 24.64 lbf/in (0.44 kgf/mm)
1 scribe mark
The standard fork spring and shock spring
mounted on the motorcycle when it leaves the
factory are not marked. Before replacing the
springs, be sure to mark them so they can be
distinguished from other optional springs.
Technical Information
No mark
(factory products)
Orange
Red
paint
(aftermarket parts)
Red and Black
White
Blue
163