Honda CRF250X 2007 Owner's Manual & Competition Handbook page 45

Subframe Upright Position
Installation
1. Loosen the subframe mounting upper bolt (1).
2. Loosely attach the lower ends of the subframe
(2) to the mainframe while connecting the air
cleaner connecting tube to the carburetor.
Then align the subframe with the rear wheel
and tighten the subframe mounting lower
bolts (3) and subframe mounting upper bolt to
the specified torque:
upper bolts: 22 lbf·ft (30 N·m, 3.1 kgf·m)
lower bolt: 36 lbf·ft (49 N·m, 5.0 kgf·m)
(2)
(1)
(3)
(1) subframe mounting upper bolt
(2) subframe
(3) subframe mounting lower bolts
40
Servicing Your Honda
3. Tighten the screw (4) on the air cleaner
connecting tube clamp (5).
(5)
(4)
(4) screw
(5) air cleaner connecting tube clamp
4. Install the rear suspension upper mounting
bolt (6), nut (7) and wire band (8).
Tighten the rear suspension upper mounting
nut to the specified torque:
32 lbf·ft (44 N·m, 4.5 kgf·m)
(8)
(6)
(6) rear suspension upper mounting bolt
(7) rear suspension upper mounting nut
(8) wire band
5. Install the muffler (page 63).
6. Install the seat (9) (page 36).
7. Install the left side cover (10), seat mounting
bolt (11), collar (12) and left side cover bolt
(13). Close the air cleaner housing cover (14)
and turn the quick fastener (15) clockwise.
(9)
(14)
(9) seat
(10) left side cover
(11) seat mounting bolt (15) quick fastener
(12) collar
8. Install the right side cover (16), seat mounting
bolt (17), collar (18) and right side cover bolt
(19).
(7)
(16)
(17)
(19)
(16) right side cover
(17) seat mounting bolt
(18) collar
(19) right side cover bolt
9. Tighten the seat mounting bolts to the
specified torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
(10)
(11)
(12)
(13)
(15)
(13) left side cover bolt
(14) air cleaner housing cover
(18)