Table of Contents
Advertisement
Chapter 2:
Connecting Your Router
1.
Attach the antenna to the back of the router.
2.
Power off your Cable/DSL modem.
3.
Connect your computer to the
4.
Connect your
Cable/DSL modem
cable.
5.
Power on the Cable/DSL modem, BEFORE powering on the router. Wait for 60
seconds for your modem to boot up.
6.
Plug the bundled power adapter to a power outlet. Connect the power adapter to
the router. Wait for another 60 seconds for your router to boot up.
LAN
port on the router with an Ethernet cable.
to the
WAN
port on the Router with an Ethernet
7
www.encore-usa.com
Advertisement
Table of Contents
