Hardware Connections; Connecting The Wlan Router; Check The Installation - Encore ENHWI-N2 User Manual

802.11n wireless lan router

Hide thumbs Also See for ENHWI-N2:

Table of Contents

Hardware connections

1. Plug in one end of the network cable to the WAN port of the WLAN Router.

2. Plug in the other end of the network cable to the Ethernet port of the xDSL or

Cable modem.

3. Use another network cable to connect to the Ethernet card on the computer

system; the other end of the cable connects to the LAN port of the WLAN

Router. Since ENCORE 802.11n Wireless Router has four ports, you can

connect up to four computers directly to the unit. Then you do not have to buy a

switch to connect these computers since one WLAN Router functions both as a

connection-sharing unit and as a switch.

The control LEDs of the WLAN Router are clearly visible and the status of the

network link can be seen instantly:

1. With the power source on, once the device is connected to the broadband modem,

the Power, System, LAN, WLAN and WAN port LEDs of the WLAN Router

will light up indicating a normal status.

2. When the WAN Port is connected to the ADSL/Cable modem, the WAN LED

will light up.

3. When the LAN Port is connected to the computer system, the LAN LED will

light up.

- 7 -

Table of Contents