Horizon Fitness LS 625E User Manual page 10

A S SE MB LY ST E P 
CONSOLE MAST
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.
B) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT & WASHERS.
C) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS and align NOTCH with TAB making sure handlebars are
joined together completely. Secure UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED SET
SCREWS.
D) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
E) Repeat on other side.
10
UPPER HANDLEBAR
NOTCH
TAB
LOWER HANDLEBAR
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
PRE-ATTACHED
SET SCREWS
FRONT
HANDLEBAR
COVER
PRE-ATTACHED
BOLT & WASHER
UPPER
HANDLEBAR
BACK
HANDLEBAR
COVER
LOWER
HANDLEBAR