How To Reverse Drawer Door Handle - Kenmore 795.6900 Series Service Manual

3-7-5 HOW TO REVERSE DRAWER
DOOR HANDLE
NOTE
: Handle appearance may vary from illustrations
on this page.
• Loosen the 2 set screws with the 3/32" Allen
wrench and remove the handle.
Fig. 60
Screw
Handle
• Loosen the handle mounting fasteners
with the 1/4" Allen wrench.
Fig. 61
fastener
•
Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Fig. 62
Plug button
• Install the plug buttons on the left side.
Plug buttons
Fig. 63
• Install the handle mounting fasteners
on the right side. Turn handle upside down.
Fig. 64
• Install the handle by adjusting handle
footprints to fit mounting fasteners. Using a
3/32" allen wrench tighten the set screws.
Fig. 65
- 16 -
Handle Mounting
Fastener