Kenmore 795.6900 Series Service Manual page 41

8-1-10 Defect Diagnosis Function
1. Automatic diagnosis makes servicing the refrigerator easy.
2. When a defect occurs, the buttons will not operate; but the tones. such as ding. will sound.
3. When the defect CODE removes the sign, it returns to normal operation (RESET).
4. The defect CODE shows on the Refrigerator and Freezer Display.
ERROR CODE on display panel
NO ITEM
Failure of freezer
1
sensor
Failure of
2
refrigerator sensor
Failure of defrost
3
sensor
4
Failure of defrost
mode
5
Failure of BLDC
fan motor at
freezing
compartment.
*LED check function: If simultaneously pressing the Cold key of refrigerator Temp and the Cold key of freezer temperature
for a second, all display LED graphics on. If releasing the button, the LED graphics displays the previous status.
ERROR CODE
1 2
Er FS
Er rS
Er dS
Er dH
Er FF
- 41 -
CONTENTS
Cut or short circuit wire
Cut or short circuit wire
Cut or short circuit wire
When defrost sensor
does not reach 8°C within
1 hour after starting
defrost.
If there is no fan motor
signal for more than 115sec
in operation fan motor
REMARKS
Inspect Connecting wires
on each sensor
Snapping of defrost heater
or temperature fuse, pull-
out of connector (indicated
minimum 2 hours after
failure occurs)
Poor motor, hooking to
wires of fan, contact of
structures to fan, snapping
or short circuit of Lead
wires.