Door Handle Installation (Optional) - Kenmore K Series Use & Care Manual

Door Handle Installation (Optional)

Included Parts :
Two Handle Attachment Bolts (A), Hex
Wrench (B)
1 Insert and tighten the handle attachment
bolts into the upper and lower holes in
the door.
2 Place the holes in the handle ends over
the handle attachment bolts (1) and slide
handle down (2).
Fig1
냉동고_K@FU015AWD(EN+ES).indd 12
A
B
1
2
3 Using the supplied hex wrench, tighten
the set screws in the handle ends to
secure the handle to the bolts.
12
2021-03-29 오전 11:05:35