Table of Contents
Advertisement
TRAY
4 Pull the tray.
8 Remove the tray.
• SUB CHASSIS INSTALLATION
Note: Follow the assembly procedure in the numerical order given.
2 Install the drive gear with gear
position as shown in figure.
front side
1 two screws
(PTPWH2.6 × 7)
7 lock lever
A
3 Rotate the control cam
in the direction of arrow A .
gear
3 screw
(PTPWH2.6 × 16)
– 10 –
2 chucking yoke (K)
6 damper (S)
5 claw
7 lock lever
5 two screws
(PTPWH2.6 × 7)
4 sub chassis
1 Install the control cam
with gear position as shown
in figure.
gear
front side
Hide quick links:
Advertisement
Table of Contents
