Sony HCD-CP11 Service Manual
Sony HCD-CP11 Service Manual

Sony HCD-CP11 Service Manual

Micro hi-fi component system

Advertisement

Quick Links

SERVICE MANUAL
Note
CD block, tape deck block and
tuner pack are supplied with
the assembled block.
HCD-CP11
is the Amplifier, CD
player, Tape Deck and Tuner section
in CMT-CP11/CP11K.
HCD-CP11
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
cD
Model Name Using Similar Mechanism
NEW
"DOLBY" and the double-D symbol OO are trade-
Section
| CD Mechanism Type
| _CDMs5-K5BD41
marks of Dolby Laboratories Licensing Corporation.
Tape deck | Model Name Using Similar Mechanism |
NEW
Section
Tape Transport Mechanism Type
TCB-020
SPECIFICATIONS
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from 70 -
20,000 Hz; rated 18 watts per channel minimum
RMS power, with no more than 0.9% total
harmonic distortion from 250 milliwatts to rated
output.
North American model:
Continuous RMS power output (reference):
35+35W
(6 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07% (6 ohms at 1 kHz,
18 W)
European model:
DIN power output (rated):
30+30W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 +35 W
(6 ohms at | kHz, 10% THD)
Music power output (reference):
85 +85 W
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated):
30+ 30 W
(6 ohms at | kHz, DIN)
Continuous RMS power output (reference):
35+35W
(6 ohms at 1 kHz, 10% THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated):
24+ 24W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
27+27W
(6 ohms at 1 kHz, 10% THD)
Inputs
MD IN (phono jacks):
Sensitivity 500 mV, impedance 47
kilohms
VIDEO IN (phono jacks): Sensitivity 250 mV, impedance 47
kilohms
Outputs
LINE OUT (phono jacks): Sensitivity 250 mV, impedance 1
kilohm
OPTICAL DIGITAL OUT (CD):
Optical
PHONES (stereo phone jack):
Accepts headphones with an
impedance of 8 ohms or more
SPEAKER:
Active speaker system, 6 ohms
— Continued on next page —
MICRO Hi-Fi COMPONENT SYSTEM
ON Y.

Advertisement

Table of Contents
loading

Table of Contents