Caller Id; Call Waiting; 3-Way Calling - Kyocera HYDRO VIBE User Manual

Caller ID

Caller ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps.
1. Touch >
2. Touch
3. Enter a phone number.
4. Touch

Call Waiting

When you're on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your
phone's screen informs you that another call is coming in and displays the caller's phone
number (if it is available).
To respond to an incoming call while you're on a call:
■ Swipe
. This puts the first caller on hold and answers the second call.
To switch back to the first caller:
■ Touch Switch calls.
Note: For those calls where you don't want to be interrupted, you can temporarily disable Call
Waiting by touching
reactivated once you end the call.

3-Way Calling

With 3-way calling, you can talk to two people at the same time. When using this feature, the
normal airtime rates will be charged for each of the two calls.
1. On the Dialpad screen, enter a number and touch
Contacts).
2. Once you have established the connection, touch Add call, and dial the second number
(or place the call from Logs or Contacts). This puts the first caller on hold and dials the
second number.
3. When you're connected to the second party, touch Merge calls. Your conference call is
now in session.
Phone Calls
> Dialpad tab to display the phone dialpad.
.
.
before placing your call. Call Waiting is automatically
(or place a call from Log or
45