Voicemail Notification; Retrieve Your Voicemail Messages - Kyocera HYDRO VIBE User Manual

■ For information on setting up your voicemail, see
Tip: For information on using the Visual Voicemail app, see

Voicemail Notification

There are a couple of different ways your phone alerts you to a new voicemail message.
●
By sounding the assigned notification sound.
●
By vibrating the phone when the vibrate setting is on.
●
By displaying
voicemail message(s) is received. The figure is the number of new messages. This icon
means you have ten unheard new messages.
Note: When you are roaming off the network, you may not receive notification of new voicemail
messages. It is recommended that you periodically check your voicemail by dialing 1 + area
code + your wireless phone number. When your voicemail answers, touch and enter your
password. Roaming rates apply when you access voicemail while roaming off the network.
Note: Your phone accepts messages even when it is turned off. However, your phone notifies
you of new messages only when it is turned on and you are in a network service area.

Retrieve Your Voicemail Messages

You can review your messages directly from your wireless phone (using either traditional
voicemail or Visual Voicemail) or from any other touch-tone phone.
Use Traditional Voicemail to Access Your Messages
1. Touch >
2. Touch and hold
3. Follow the voice prompts to listen to and manage your voicemail messages.
Use Visual Voicemail to Access Your Messages
1. Touch >
2. Touch an entry to listen to the message.
Note: You are charged for airtime minutes when you access voicemail from your wireless
phone.
Use Another Phone to Access Messages
1. Dial your wireless phone number.
Phone Calls
within the Notifications area of the Status bar when a new unheard
> Dialpad tab to display the phone dialpad.
. If prompted, enter your voicemail password.
> Voicemail .
Set Up Voicemail.
Visual Voicemail.
38