Call Numbers With Pauses; Call Using The Plus (+) Code - Kyocera HYDRO VIBE User Manual

Once an emergency call is placed, your phone will be in Emergency mode where non-
emergency calls cannot be made.
To exit Emergency mode:
■ Touch
> Exit Emergency mode > Yes.
Enhanced 9-1-1 (E911) Information
This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing
E911 emergency location services where available.
When you place an emergency 9-1-1 call, the GPS feature of your phone seeks information to
calculate your approximate location. Depending on several variables, including availability and
access to satellite signals, it may take up to 30 seconds or more to determine and report your
approximate location.
Important: Always report your location to the 9-1-1 operator when placing an emergency call.
Some designated emergency call takers, known as Public Safety Answering Points (PSAPs),
may not be equipped to receive GPS location information from your phone.

Call Numbers with Pauses

You can dial phone numbers with pauses for use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your phone:
●
Add 2-sec pause: Automatically sends the next set of numbers after two seconds.
●
Add wait: Sends the next set of numbers when you touch Yes in the pop-up window.
1. Touch >
2. Enter all or part of a number.
3. Touch > Add 2-sec pause or Add wait.
4. Enter additional numbers.
5. Touch

Call Using the Plus (+) Code

When placing international calls, Plus Code Dialing automatically enters the international access
code for your location (for example, 011 for international calls made from the U.S.).
1. Touch >
Phone Calls
> Dialpad tab to display the phone dialpad.
to dial the number.
> Dialpad tab to display the phone dialpad.
35