Kyocera HYDRO VIBE User Manual page 13

1. Install the battery.

Insert your fingernail into the slit at the bottom of the battery compartment cover and
lift the cover up gently.

Insert the battery, contacts end first, and gently press the battery into place.

Replace the battery compartment cover and press down firmly on all sides of the
back cover as shown by the arrows in the figure to make sure all the tabs are seated
and there are no gaps around the cover.
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.

Plug the smaller end of the USB cable into the charger/accessory jack on the bottom
of your phone.
Get Started 2