Displaying The Phone Service Provider Name; Adjusting The Volume For The Microphone Input; Selecting The Output Speaker; Displaying The Firmware Version - Alpine CDE-126BT Owner's Manual

Displaying the phone service provider name

Setting item : SEV NAME
The service provider name of the connected BLUETOOTH compatible
device will be displayed. If a BLUETOOTH compatible device is not
connected, "ID UNSENT" will also be displayed.
• Depending on the character type some phone service provider name
cannot be displayed. "ID UNSENT" will also be displayed.

Adjusting the volume for the microphone input

You can emphasize or weaken the microphone input volume level.
Setting item : MIC INPUT
Turn the Rotary encoder to select the desired volume level (0~7).
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.

Selecting the output speaker

You can select the connected speaker in car to output the sound signal of
telephone.
Setting item : SPEAKER SL
ALL: The sound be output from all of speakers in car.
F-L: The sound only be output from the front left speaker.
F-R: The sound only be output from the front right speaker.
F-LR: The sound be output from the front left and front right
speaker.
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.

Displaying the firmware version

Setting item : FW VERSION
The current firmware version will be displayed.

Updating the firmware

Setting item: FW UPDATE
With this setting, the BLUETOOTH firmware update function can be
activated, but other devices and software may be required. For details,
consult ALPINE website.

Hands-Free Phone Control

About the Hands-Free Phone

Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid answering a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person's voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider's network. Additionally, certain
features may not be activated by your service provider, and/or the
provider's network settings may limit the feature's functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner's Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.

Answering a Call

Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
Press
.
The call starts.
• When "Setting the Received Calls automatically (Auto Answer)"
(page 20) is set to AT ANS ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted. After calling,
playback will resume.

Hanging up the Telephone

Press and hold for at least 2 seconds.
The call finishes.
• While receiving you can also hang up by pressing

Redial Function

You can redial the person you have previously called.
After finishing a call "----------" will be displayed, press
within 5 seconds.
The telephone is redialed.
• If you receive a call from an unknown number, you cannot use the
redial function to call back.
.
21
-EN