Table of Contents
Advertisement
To connect and
remove tools
To use the cleaner with tools dis-
connect the nozzle from the ex-
tension wands. (For Model
S3237, leave the nozzle assembl-
ed to the wands and only discon-
nect nozzle cord and curved
wand from handle, since two ad-
ditional wands are provided for
use with tools. 1
To connect the tools, insert end
of tool into the extension wand
and snap into position. To dis-
connect, press down on the cen-
ter of the white plastic spring
latch and remove tool.
Tools may also be attached to the
handle grip by rotating the plastic
latch ring to accept the button
projection on the tool. Then, turn
the latch ring as shown to lock
the tool in place.
To remove the tool, reverse the
above procedure.
Power cord
To avoid damage to the power
cord, leave it connected to the
receptacle on the cleaner at all
times.
To clean stairs
Clean stairs by standing the
cleaner on its side as pictured in
the illustration. Clean stairs from
bottom to top.
11
I
Advertisement
Table of Contents
