Table of Contents
Advertisement
21. Suction Regulator should be opened for easy cleaning of some
types of carpet, lightweight flexible rugs and lightweight draperies,
22. Cord Clips clip nozzle cord to extension wands.
23. Nozzle Cord Connection to Handle is made by plugging nozzle cord
into receptacle underneath the handle.
24. Plastic Latch Ring rotates to connect handle to extension wand or
to cleaning tools.
tools.
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
How to assemble
1. Connect hose
To connect hose, insert hose into
opening of cleaner lining up the
arrow on the hose with the dot on
the cleaner. Turn the hose clock-
wise until the arrow lines up with
the bar on the cleaner and latch
locks into place.
When the hose is attached prop-
erly, the hose cord plug will reach
to the receptacle on the cleaner.
Insert the plug firmly and as deep
into the receptacle as possible.
To disconnect hose, first remove
hose cord plug from receptacle.
Then, depress latch away from
hose connection opening in clean-
er. While holding latch, turn the
hose counterclockwise until the
arrow lines up with dot on the
cleaner, Remove hose.
5
Advertisement
Table of Contents
