Display Settings; Account Settings - Q-See QC SERIES User Manual

DISPLAY SETTINGS

This window lets you control your on-screen display.
General
Resolution – Adjust the screen resolution to match your monitor's capabilities.
Transparency – You can make your on-screen menus more transparent to let you see more of the
video image behind them.
Time Display/Channel Display – You can turn off these on-screen displays if desired.
Image Enhance – Enabling this feature will allow the NVR to adjust the on-screen video image for clarity
and color balance. It will not affect the recorded video.
Tour
The NVR can cycle through individual - or groups - of channels.
Motion Tour/Alarm Tour Type – When a motion event or other alarm occurs, the monitor can start a tour.
Enable Tour – When enabled, clicking the Tour
button in the Navigation Bar will start
the tour.
Interval – The time each channel will be on screen.
Window Split – Display a single channel or more.
• Click the Add button to select channels for a
split-screen group.
• Groups will appear in order, you can re-arrange
the order with the Move Up/Down buttons.
• Only those groups with a check mark will
display.
62
PICTURE 4-44
PICTURE 4-45

ACCOUNT SETTINGS

This is the account management window where you can add and remove users as well as change user
settings and permissions.
• There are two user accounts which cannot be deleted: Admin and User.
• You should change their passwords from their defaults: Admin: admin User: 666666
Adding a New User
• There are two types of accounts - Admin and User.
• Admin accounts can control 15 different functions while User accounts can access up to 5.
1. Click on the Add User button to open the Add User window.
2. Enter the user name and password. Add a memo with details, if desired.
Reusable – More than one user can log in using this account.
3. Select the type of account - Admin or User.
4. Authorize the user for specific functions
including what channels they can play back and
monitor.
5. Click Save before exiting.
• Delete a user by clicking on the red X. Edit an
account by clicking on the yellow pencil.
Modify Group – Adjusts authority for all users in
the Admin or User group.
PICTURE 4-46
PICTURE 4-47
63