Putting A Line On Hold - Siemens OpenStage15 User Manual

Making calls with multiple lines
Step by step
102
All multi-line users that share the line on which
the call is being held (
up the held call. To prevent other users from an-
swering the held call, you must place the call on
"Consultation" hold
Depending on the setting made by your service
personnel, you may have to press the trunk key
twice to accept the call on the other line. The first
call is either placed on hold or released depend-
ing on the setting.
[
Conduct call on line 2.
\
End call on line 2.
T
Press line key for line 1.
[
Retrieve call on line 1.

Putting a line on hold

On a multiline telephone you can use the line keys to
place calls on hold.
Prerequisite: You are conducting a call.
R
Press the call-line sensor key.
T
• The LED line key flashes.
• The LED line displays the hold status on all multi-line
phones to which the line is connected.
• On phones connected to the line, a user can press
the relevant line key and accept the held call.
During a consultation call or after accepting a waiting
call the hold function cannot be used.
page 20) can now pick
page 47.